MiniTec Superbrake Help

[REEDHMB]

Hi, thought I’d post this here before trying to call Minitec for advice (I know they are busy). I purchased 1974 Innocenti with a B18. It has 8.4” front disk brakes. I purchased the Minitec superbrake kit, and assumed it would be a bolt on modification. The calipers will bolt up to the hub, without the rotor, however the depth is off by about a 1/8" so the calipers won't clear the rotors. It looks like the wheel bearings need to be set deeper, or the adapter thickness is off?

Mark

[REEDHMB]

This is my first mini and I know very little about them. I purchased the car off e-bay, from someone who couldn't provide very much history on the car. I assumed the front brakes were stock, but after taking a close look and some google searches, it appears to have Metro brakes. I should have figured this out before posting, the answer was right there infront of me. If I'm seeing this correctly I must have a metro drive hub, which is why the superbrake won't fit. I guess I'll need a new drive hub?

Mark