PDA

View Full Version : Fuel Pump


Quickcarnut
10-13-2007, 07:05 PM
[b]So what fuel pump did you buy and use and why??
where did you buy and cost
thanks mark
jimfai
10-15-2007, 03:36 PM
i used a bosch high output one, it is very quiet, about $225 retail and $140 wholesale, i can get a part number for you if you like.
Quickcarnut
10-15-2007, 06:46 PM
i used a bosch high output one, it is very quiet, about $225 retail and $140 wholesale, i can get a part number for you if you like.
thanks Jim that would be great..and where and what is the PSI as a honda needs 38 to 45 psi
jimfai
10-16-2007, 06:59 AM
they put out over double that, i will go to my rental garge and get you a part number today, jim
william75
10-16-2007, 07:06 AM
i was running a Walbro for awhile then recently switched over to the Bosch unit...same performance, just a lot more $$$....
pwr2wh8
10-16-2007, 11:56 AM
i was running a Walbro for awhile then recently switched over to the Bosch unit...same performance, just a lot more $$$....
did the swap to the bosch unit solve your fuel problem that occurred on the labor day run?
Quickcarnut
10-16-2007, 01:46 PM
what do you think of this one ??

http://store.summitracing.com/partdetail.asp?autofilter=1&part=MSD%2D2225&N=700+%2D128243+115&autoview=sku
william75
10-16-2007, 10:04 PM
i was running a Walbro for awhile then recently switched over to the Bosch unit...same performance, just a lot more $$$....
did the swap to the bosch unit solve your fuel problem that occurred on the labor day run?

actually it did....i barely made it home that day, after the accident and all with my buddys civic.....the fuel pump was cutting in and out, so i decided to replace it anyway....alot quieter now too......
pwr2wh8
10-18-2007, 12:01 PM
good to hear! i'll probably need a stronger fuel pump as well with the new build. since you guys have good results with the bosch unit, i'll most likely give it a try.
Rice a Mini
10-22-2007, 01:43 PM
what do you think of this one ??

http://store.summitracing.com/partdetail.asp?autofilter=1&part=MSD%2D2225&N=700+%2D128243+115&autoview=sku

Thats what I have coming in this week. It looks like the walbro with an MSD sticker on it to me.

Hey william, what happened to mess with the pump?? Anything I should be careful of? Wes
william75
10-22-2007, 10:05 PM
just dont run the pump dry and install a pre filter before the pump and you should be fine......just a little noisier than other pumps......